Composite Materials

Engineered for strength, durability, and versatility—our composite materials combine the best properties of multiple components to meet the demands of modern industrial applications.

Key Features

High Strength-to-Weight Ratio: Offers exceptional structural strength while remaining significantly lighter than traditional materials like steel or aluminum, reducing overall system weight.
Corrosion Resistance: Inherently resistant to moisture, chemicals, and environmental degradation, eliminating the need for additional coatings or treatments.
Customizable Properties: Tailorable to specific application needs—adjust fiber type, resin matrix, and reinforcement pattern to optimize strength, flexibility, or thermal performance.
Thermal Stability: Maintains structural integrity across a wide temperature range (-50°C to 200°C), suitable for both extreme cold and high-heat environments.
Low Maintenance: Resists wear, fading, and deformation over time, reducing maintenance costs and extending product lifespan.
Design Flexibility: Can be molded into complex shapes and configurations, enabling innovative product designs that are not feasible with rigid traditional materials.

Applications

Aerospace

Aircraft components, interior structures, and lightweight panels

Automotive

Body panels, chassis components, and interior parts

Marine

Hulls, decks, and marine equipment

Construction

Reinforcement bars, panels, and structural components

Wind Energy

Wind turbine blades and structural components

Medical

Prosthetics, orthopedic devices, and medical equipment

Technical Specifications

Material Composition	Fiber Reinforcement (Carbon, Glass, or Aramid) + Polymer Resin Matrix (Epoxy, Polyester, or Vinyl Ester)
Density	1.2 - 1.8 g/cm³ (depending on fiber type and volume fraction)
Tensile Strength	300 - 1,800 MPa (varies by fiber type and orientation)
Tensile Modulus	20 - 150 GPa
Flexural Strength	400 - 2,200 MPa
Flexural Modulus	15 - 120 GPa
Compressive Strength	200 - 1,000 MPa
Impact Strength (Charpy)	20 - 150 kJ/m²
Operating Temperature Range	-50°C to 200°C (-58°F to 392°F)
Thermal Conductivity	0.2 - 10 W/(m·K) (varies with fiber orientation)
Coefficient of Thermal Expansion	-1.5 to 50 × 10⁻⁶ /°C
Water Absorption (24hr immersion)	0.1 - 1.5%
Flammability Rating	UL94 V-0 to V-2 (depending on resin system)
Maximum Fiber Volume Fraction	50 - 70%
Available Forms	Sheets, Tubes, Rods, Custom Molded Parts, Prepreg Sheets
Standard Sheet Sizes	1220×2440mm (4×8ft), 1524×3048mm (5×10ft) - up to 50mm thickness
Surface Finish	Smooth, Textured, or Custom as per requirements
UV Resistance	Excellent with appropriate resin system